
Fractional CO2 Laser Singapore
Fractional CO2 for acne scars and texture, focused CO2 for selected lesions. Medical Director Dr Sin Yong sets depth, density and spacing for Asian skin at IN Eternity Clinic, a DEKA Centre of Excellence. See also our guide to Fotona laser.
WhatsApp to Enquire →Key facts ↓A CO2 laser is a 10,600 nm laser that vaporises water-rich skin and triggers collagen remodelling; IN Eternity Clinic in Singapore uses the fractional DEKA Tetra Pro. Fractional CO2 treats microscopic columns, so the surface heals in about a week. CO2 laser in Singapore is used here for acne scars, texture and selected lesions, with settings planned around pigment risk in Asian skin.
- Sessions: For acne scars, usually three to six CO2 laser sessions six to eight weeks apart, often combined with subcision or TCA CROSS.
- Recovery: About five to seven days of crusting after a full-face fractional session, with pinkness for weeks.
- Comfort: Numbing cream is applied for about 45 to 60 minutes and cooled air is used; most people feel hot prickling, then sunburn-like warmth.
- Cost: Depends on the area, the protocol, any combined steps and the number of sessions; the S$120 consultation fee is waived with any medical treatment.
- Who treats you: Dr Sin Yong examines the skin and sets the protocol.
Milia seeds and how they are removed are covered on milia removal in Singapore.
All intimate-health options are on feminine rejuvenation in Singapore.
Fractional CO2 laser in Singapore is used for acne scars, texture and resurfacing. It has more downtime than non-ablative lasers, usually several days of redness and flaking.
CO2 laser at a glance
| What it is | A 10,600 nm laser, absorbed by water, that vaporises tissue and heats the surrounding collagen; used here as the DEKA Tetra Pro (SmartXide). |
|---|---|
| Used for | Acne scars (SCAR3 / S3 protocol), texture and selected benign lesions after examination. |
| How it works | Fractional mode treats microscopic columns so the surface heals in about a week; focused mode treats single lesions or scar pits. |
| Typical sessions | For acne scars, usually three to six sessions six to eight weeks apart, often combined with subcision or TCA CROSS. |
| Downtime | About five to seven days of crusting after a full-face fractional session; pinkness for weeks. |
| When results show | Smoother once healed at one to two weeks; collagen keeps remodelling for three to six months. |
| Who should avoid or wait | Pregnancy (elective laser usually deferred), a recent tan, and any growth whose nature is uncertain; skin types III to V need settings planned around darkening. |
| Who performs it | Medical Director Dr Sin Yong examines the skin and sets the protocol. |
Dr Sin Yong, Medical Director of IN Eternity Clinic, explains that in Asian skin a stronger setting is not necessarily a better result, so several moderate sessions often serve better than one aggressive one, and CO2 is never used on a growth whose nature is uncertain.
On this page
- Device: DEKA Tetra Pro CO2 laser (SmartXide), at a designated DEKA Centre of Excellence.
- Wavelength: 10,600 nm, absorbed by water; vaporises tissue and heats the surrounding collagen.
- Main modes: fractional (microscopic columns) and focused (single lesions or scar pits).
- Uses here: acne scars (SCAR3 / S3 protocol), texture and pores, syringomas, xanthelasma and selected benign growths.
- Recovery: about five to seven days of crusting after a full-face fractional session; pinkness for weeks.
- Asian skin: post-inflammatory darkening is the main risk; density, spacing and sun care are planned around it.
- Consultation: S$120, waived with any medical treatment. IN Eternity Clinic, 9 Scotts Road, #12-01 Pacific Plaza.
- Preventing dark marks: in a split-face trial in 40 people with skin type IV, post-inflammatory hyperpigmentation followed fractional CO2 on 75 of 100 sides treated with petrolatum alone, against 40 of 100 sides given a strong topical steroid for the first two days. (Source: Cheyasak 2015)
- CO2 vs erbium for acne scars: in 24 Asian patients treated on opposite sides of the face, scars improved by more than half on 65 of 100 CO2 sides and 55 of 100 erbium sides six months after two sessions; the difference was not significant. (Source: Manuskiatti 2013)
- SmartXide in Asian skin: seven Japanese adults with skin type III had three sessions of SmartXide DOT fractional CO2 for acne scars, and all showed improvement three weeks after the third. (Source: Omi 2011)
- Fractional laser complications: of 961 non-ablative fractional laser treatments, 73 (about 8 in 100) had a complication, most often acne-like breakouts and cold sores. (Source: Graber 2008)
What is a CO2 laser, and how does it work on skin?
A CO2 laser produces infrared light at 10,600 nm, a wavelength that water absorbs very strongly. Because skin is mostly water, each pulse turns a small volume of tissue to vapour almost instantly. That is ablation. Around each ablated zone sits a thin rim of heated tissue where collagen contracts and the wound-healing response begins. Over the following weeks and months, fibroblasts lay down new collagen and the dermis remodels, which is why skin texture and scars keep changing long after the surface has healed.
Three dials decide what a CO2 laser does to your skin. Energy sets how deep each column or spot reaches. Density sets how much of the surface is treated in a pass. Stacking sets how many pulses land on the same point. A deep, narrow, low-density setting remodels the dermis while leaving most of the surface intact; a shallow, wide setting polishes the upper layers; a focused beam can remove a small growth layer by layer. The same device can therefore be gentle or aggressive, and most of the judgement lies in the settings rather than the machine.
At IN Eternity Clinic the CO2 laser is the DEKA Tetra Pro (SmartXide platform). IN Eternity Clinic is a designated DEKA Centre of Excellence, and the Tetra Pro is used for the SCAR3 (S3) acne-scar protocol, for lighter resurfacing of texture and for selected skin lesions.
Fractional vs fully ablative CO2 laser: what is the difference?
Older CO2 resurfacing removed the whole surface layer of the treated area in one session. It could produce marked tightening, but healing took one to two weeks of open, weeping skin, redness lasted months, and in medium and darker skin the risk of lasting pigment change was high. Fractional CO2 changed this in the mid-2000s by splitting the beam into a grid of microscopic columns, so only a fraction of the skin is treated in each pass. The untouched bridges between columns supply the cells that close each micro-wound, and the surface usually heals in about a week.
| Fully ablative CO2 | Fractional CO2 | Focused CO2 beam | |
|---|---|---|---|
| What is treated | The whole surface of the area | Microscopic columns; bridges of intact skin between them | One small lesion or a single scar pit |
| Typical uses | Severe photoageing and wrinkles in lighter skin; now used far less | Acne scars, texture, enlarged-looking pores, fine lines | Syringomas, xanthelasma, some moles and growths after examination; point shots into scar pits |
| Healing of the surface | One to two weeks, open and weeping | About five to seven days of crusting and flaking | A small scab for one to two weeks |
| Redness afterwards | Often months | Usually weeks | Local pinkness for weeks |
| Pigment risk in skin types III–V | High, including lasting lightening | Present and manageable with planning | Local darkening possible |
| How it is used at IN Eternity Clinic | Not described here as a routine option; any ablative step is decided at assessment | The main way the Tetra Pro is used on the face | For selected lesions and scar pits |
In practice, fractional and focused settings are often combined. On the S3 acne-scar protocol, single deeper point shots go into individual pits before a lighter fractional pass over the skin around them, so the scar and its surroundings are not treated as if they were the same.
What is CO2 laser used for at IN Eternity Clinic?
| Use | How the laser is set | Typical visible recovery | More detail |
|---|---|---|---|
| Acne scars | Point shots into pits, then a fractional pass (SCAR3 / S3 protocol), with subcision and TCA CROSS where needed | About 5–7 days | CO2 laser for acne scars |
| Texture and enlarged-looking pores | Lighter, lower-density fractional passes (S3 Resurfacing Lift) | About 3–5 days | Enlarged pores treatment |
| Syringomas | Focused, shallow ablation of each bump, after diagnosis | Small scabs, about 1–2 weeks | Syringoma removal |
| Xanthelasma | Focused ablation of the yellow plaques, after a cholesterol check is advised | Scabs, about 1–2 weeks | Xanthelasma removal |
| Some moles and benign growths | Layer-by-layer ablation, only after the lesion is examined and judged benign | A small scab, 1–2 weeks | Mole removal |
| Vaginal laxity and dryness | A separate, dedicated vaginal handpiece (Mona Lisa Touch) | Little visible recovery | Mona Lisa Touch |
For acne scars, CO2 is one layer of the plan rather than the plan itself. Rolling scars need release first and ice-pick scars need treatment inside each pit, which is why the full pathway sits on acne scar treatment in Singapore, with the scar types explained on ice pick scars and boxcar scars.

CO2 laser vs FSX, pico and RF microneedling
These treatments are often compared because they all aim at texture and scars. They differ in how much of the surface they break, how deep they reach and how much they raise the risk of darkening.
| Fractional CO2 (Tetra Pro) | FSX fractional laser | Pico laser (fractional) | RF microneedling | |
|---|---|---|---|---|
| Surface | Ablated in columns | Mostly intact (non-ablative) | Intact or minimally broken | Pinpoint needle entries |
| Reach | Deep dermal remodelling plus surface renewal | Dermal heating under intact skin | Shallow pressure injury, little heat | Heat at a set depth beneath the surface |
| Suits | Boxcar edges, scar pits, marked texture | Mild texture, pores, early lines | Shallow texture, brown marks | Rolling and shallow boxcar scars, pores, darker skin |
| Visible recovery | About 5–7 days | A few days of redness | A day or two | About 2–4 days |
| Darkening risk in Asian skin | Highest of the four; planned around | Lower | Lower | Lower than CO2 |
The FSX fractional laser is a different device and a separate option, chosen when downtime must be short. RF microneedling is often used where skin darkens easily, and pico laser for marks and shallow texture. Many scar plans use two of these in sequence.
Is CO2 laser safe for Singapore skin types, and how is PIH risk reduced?
Most skin in Singapore is Fitzpatrick type III to V. In this skin, heat and inflammation readily stimulate pigment cells, and post-inflammatory hyperpigmentation (PIH) is the main trade-off of CO2 laser. Studies of fractional resurfacing in Asian patients have reported PIH in a substantial share of treatments, more often with higher density and in darker skin. When it appears, it usually shows as a brown haze two to six weeks after a session and fades over months, faster when treated early. CO2 settings are chosen by skin type; a Fitzpatrick skin type test is a useful first step before your consultation.
- Moderate density. Depth is chosen for the scar; density is kept moderate, because density drives heat build-up more than depth does.
- Spacing. Sessions are usually six to eight weeks apart, and heavy heat-based steps are not stacked on the same day in darker skin.
- Timing. No treatment on recently tanned, sunburnt or inflamed skin; skin preparation beforehand where it is judged useful.
- Aftercare. A short course of anti-inflammatory care after ablative resurfacing has been studied in Asian patients to lower PIH; whether it suits you is a doctor’s decision.
- Sun and visible light. A tinted, broad-spectrum sunscreen, a hat and shade for the weeks after treatment, which in Singapore means every day of the year.
Heat and humidity add a local twist. Sweat on healing skin stings and invites irritation, so the gym, hot yoga, saunas and long outdoor sessions wait until the surface has closed. Where the risk is judged too high for CO2, Dr Sin Yong leans on RF microneedling, subcision or TCA CROSS instead.
“A CO2 laser is not strong or weak. It is set. Depth for the scar, density for the skin around it, and spacing for the pigment that Asian skin wants to make.”
Your CO2 laser treatment day, step by step
A fractional CO2 session on the DEKA Tetra Pro runs to a set order. These steps describe a typical facial session for acne scars or texture; a single lesion takes less time.
- Consultation and assessment with Dr Sin Yong. The scar, texture or lesion is examined, your skin type and pigment history are recorded, and medicines, cold-sore history and any recent oral acne treatment are reviewed. Any growth is checked before it is considered for laser.
- Preparation. The skin is cleansed and standard photographs are taken. Numbing cream is applied for about 45 to 60 minutes. People prone to cold sores may be given preventive medicine. Eye protection goes on before the laser starts.
- The treatment. Point shots go into individual scar pits where needed, then fractional passes cover the area at the depth and density set for your skin. Cooled air is used throughout, and the laser time is usually shorter than the numbing time.
- Straight after. The skin feels hot, like strong sunburn, and shows a fine grid of pinpoint marks. Cool compresses and the ointment you are given are applied, and you go home with written aftercare and the clinic’s WhatsApp number.
- The next days. Swelling usually peaks over days one to three and fine brown crusts form. Keep the skin moist, cleanse gently and do not pick. Crusts usually flake away by about days five to seven; the gym and saunas wait until the surface has closed.
- Review. At about six to eight weeks the skin is compared with the first photographs and any further session is planned. Report a brown haze earlier, because early care shortens it.
Plans for acne scars are usually a course; CO2 vs RF microneedling vs pico for acne scars explains when each is chosen.
CO2 laser downtime and aftercare in Singapore
| When | What you usually see | What to do |
|---|---|---|
| Day of treatment | Heat like a strong sunburn; a fine grid of pinpoint marks; swelling begins | Cool compresses; the ointment you are given; no make-up |
| Days 1–3 | Swelling peaks, often around the eyes in the morning; fine brown crusts form | Gentle cleansing, keep the skin moist, sleep slightly propped up, do not pick |
| Days 5–7 | Crusts flake away to pink new skin | Make-up and normal routines can return once crusts have gone; sunscreen daily |
| Weeks 2–6 | Pinkness fades; the window in which darkening can appear | Strict sun protection; report any brown haze early |
| Weeks 6–8 | The surface looks settled; collagen keeps remodelling | Review against the first photographs; plan the next session if needed |
Most people keep the first week free of meetings, events and travel. Fuller post-laser guidance is in post-laser scab care and Singapore humidity and post-laser care. A fuller day-by-day guide, including the pink weeks and when brown marks can appear, is in CO2 laser downtime, day by day.
CO2 laser side effects and risks: what is common and what is not
Fractional CO2 removes columns of skin, so visible healing is part of the treatment, not a complication. In Asian skin, darkening is the effect that matters most.
- Common and expected: redness, swelling and a sunburn-like heat for the first days; pinpoint crusting and flaking for about a week; pinkness that fades over several weeks; itch while healing; and small acne-like spots or milia as the skin recovers.
- Uncommon: post-inflammatory hyperpigmentation two to six weeks after a session, more likely in skin types III to V and with higher density; a cold-sore outbreak triggered by the laser; a bacterial or yeast infection of healing skin; and redness that lasts longer than expected. Scarring and lasting pale patches are rare with fractional settings.
- Contact the clinic promptly if: pain increases after the second day; you notice yellow crusts, pus, a fever or clusters of small blisters; redness spreads beyond the treated area; or a brown haze appears. These are seen the same or next day where possible.
The complication review by Metelitsa and Alster and the study of darkening after fractional resurfacing in Asians by Chan and colleagues are listed below. Where the darkening risk is judged too high, RF microneedling is often used instead.
What can CO2 laser not treat, and what is used instead?
CO2 laser resurfaces texture and indented scars, but it is not the first choice for pigment alone, melasma, redness from blood vessels, sagging or lost volume, and it is postponed over active acne. Using it for these adds downtime and, in Asian skin, pigment risk without treating the cause.
| Concern | Why CO2 is not the first tool | What is usually considered |
|---|---|---|
| Melasma or brown pigment alone | Heat can worsen melasma and trigger darkening in skin types III to V | Pigment-focused laser, skincare and sun protection |
| Redness and visible vessels | Its 10,600 nm light targets water in tissue, not blood vessels | A vascular approach, chosen at assessment |
| Sagging and jowls | Resurfacing tightens the surface a little but does not lift tissue | Energy-based lifting or threads |
| Hollows and volume loss | Resurfacing does not replace lost volume | Filler or a collagen stimulator |
| Active acne | Treating over inflamed spots risks infection and new marks | Acne controlled first |
| Tethered rolling scars | Laser cannot cut the bands that pull the scar down | Subcision before resurfacing |
| A changing or uncertain spot | Laser destroys the tissue needed for diagnosis | Examination, excision and laboratory check |
Many plans still use CO2 for one part of the job. Rolling scars may be released first and resurfaced later, and a face with both scars and early laxity may combine CO2 with a lifting treatment on a different day.
If pigment is the main concern, see melasma treatment; for laxity, skin tightening; and for scars, the full pathway on acne scar treatment. Dr Sin Yong will say at assessment if CO2 is not the right tool for your skin.
What Dr Sin Yong looks for
- What the problem actually is. Scar type, texture, a lesion or pigment, because CO2 suits some of these and not others.
- Skin type and pigment history. How your skin has darkened after spots, sun or earlier procedures sets density and spacing.
- Recent sun, tan and skincare. Exfoliating acids and retinoids are paused before treatment; a fresh tan means waiting.
- Oral acne medicine. Current or recent use is reviewed, because it changes timing.
- Cold sores and infection. A history of facial cold sores is asked about, since laser can trigger an outbreak.
- Keloid tendency. Raised scars on the chest, shoulders or jaw change what is safe.
- Any lesion to be treated. Examined first; anything uncertain is not lasered until it has been checked.
General clinical observations used at consultation; they describe what is checked, not any individual result.
When a spot is not for laser: signs to have checked first
CO2 laser removes tissue, so it is never used on a growth whose nature is uncertain. Some changes need a diagnosis first.
- A mole that is changing in size, shape or colour, has more than one colour or an irregular edge, itches or bleeds: examined, and often removed for testing rather than lasered.
- A sore or bump that bleeds, crusts repeatedly or has a pearly, rolled edge: some skin cancers look like scars or pimples.
- A new dark streak under a nail or a dark spot on the palm or sole: needs prompt medical assessment.
- An active cold sore, impetigo or other infection on the area: treatment waits until it has cleared.
- Pregnancy: elective laser is usually deferred.
Where any of these apply, the first step is a diagnosis, sometimes with a biopsy, and referral where needed.

How much does CO2 laser cost in Singapore?
CO2 laser cost depends on the area, the protocol, whether steps such as subcision are combined and how many sessions are planned; acne scars usually need a course.
| Factor | Why it changes the cost |
|---|---|
| Area | A few lesions, one cheek or the full face take very different time |
| Protocol | Fractional resurfacing, focused point treatment of scars or lesions, or a combined plan such as SCAR3 |
| Combined steps | Subcision, TCA CROSS or support injections may be staged with the laser |
| Number of sessions | Texture may need one or two; acne scars usually three or more |
| Skin type and settings | Skin that darkens easily is treated at lower density, sometimes over more sessions |
For acne-scar plans that combine CO2 with other methods, see acne scar removal cost in Singapore. At IN Eternity Clinic a consultation fee applies, and it is waived if you go ahead with any medical treatment; the fee is S$120. See fees.
Which CO2 laser device is used, and why?
Two lasers cover resurfacing here. The DEKA SmartXide Tetra PRO is an ablative fractional CO2 laser; its S3 (SCAR3) mode lets Dr Sin Yong place point shots into individual scar pits before a fractional pass over the area. It gives more remodelling per session, with redness and peeling for several days. The FSX laser (thulium and erbium glass) is non-ablative: recovery is usually milder, and more sessions are usually needed. In darker skin types, energy and density are lowered on either device to reduce pigment risk. For the non-ablative brand in this table, see Fraxel laser explained.
CO2 suits deeper acne scars and textural change when you can take several days of downtime; the FSX laser suits texture, pores and tone when you cannot. Which device is used is decided at assessment, after Dr Sin Yong has examined your skin.
Fractional CO2 vs Fraxel, erbium and fractional pico: how do they differ?
Fractional CO2 reaches deepest and needs the most recovery; erbium is shallower; Fraxel-type lasers and fractional pico leave the surface intact, with less downtime and less change.
| Laser | Type | Depth and effect | Typical downtime | Dark-mark risk in skin types III to V | Typical sessions |
|---|---|---|---|---|---|
| Fractional CO2 (DEKA Tetra Pro) | Ablative, 10,600 nm | Deepest; vaporises columns and tightens collagen | About 5 to 7 days of crusting; pink for weeks | Highest; lowered with low density and aftercare | Often 3 or more for acne scars |
| Fractional erbium (Er:YAG, another type) | Ablative, 2,940 nm | Shallower, less heat | A few days | Moderate | Several |
| Fraxel-type 1,550 nm (another brand) | Non-ablative | Heats columns under an intact surface | 1 to 3 days of redness and swelling | Moderate; density matters | 4 to 6 |
| FSX Laser (thulium and erbium glass) | Non-ablative | Surface texture, pores and tone | A day or two | Lower | A course |
| Fractional pico | Non-thermal, photoacoustic | Fine texture and shallow scars | Hours to a day | Lower | Several |
How these fit together for acne scars is set out in CO2 vs RF microneedling vs pico for acne scars, and the non-ablative option used here is described on fractional laser in Singapore.
Does a stronger CO2 laser setting give a better result?
Not necessarily. Higher energy and density remove more tissue, but in Asian skin they also raise the risk of prolonged redness and dark marks; several moderate sessions often serve better than one aggressive one.
In a study of fractional resurfacing in Chinese patients, treatment density mattered as much as energy for post-inflammatory hyperpigmentation. That is why density, spacing and the depth of each pass are set for the scar and the skin, and why aftercare, sun protection and sometimes a short course of topical steroid are planned in advance.
How should I prepare for CO2 laser?
Over two to four weeks: avoid tanning, pause retinoids and acids, keep a week free of events, and mention cold sores, acne medicine and past pigment marks.
| When | What to do | Why |
|---|---|---|
| Four weeks before | Plan around weddings, travel and photos; allow a week to heal and a few weeks of pinkness | Crusting and redness are visible |
| Two weeks before | No tanning or sunburn; daily sunscreen; pigment care if advised | Tanned skin marks more easily |
| About a week before | Pause retinoids, acids and scrubs on the area unless told otherwise | Reduces irritation and dark marks |
| If you get cold sores | Say so; a preventive plan may be started before treatment | Laser can trigger a flare around the mouth |
| Acne medicine | Tell the doctor about recent or current acne tablets | Some mean waiting before resurfacing |
| On the day | Clean skin, no make-up; numbing cream is applied in clinic | Comfort and a clean field |
When will I see results from CO2 laser, and do treated scars come back?
Texture often looks smoother once healed at one to two weeks, but collagen keeps remodelling for three to six months, so the final change is judged later.
| Time after a session | What usually happens |
|---|---|
| Days 1 to 7 | Redness, swelling and fine crusting; the skin feels tight |
| Weeks 1 to 2 | Crusts lift; skin is pink and smoother |
| Weeks 2 to 6 | Pinkness fades; the window when dark marks can appear |
| Months 1 to 3 | Collagen remodelling; scars soften gradually |
| Months 3 to 6 | Final change from the session can be judged; the next session is planned |
Remodelled scars do not usually return, although ageing and new acne can change how skin looks over years. Combined plans for mixed scarring, such as 4D Scar Reconstruction, use CO2 alongside subcision and TCA CROSS.
How many CO2 laser sessions are needed?
| Use | Usual course |
|---|---|
| Acne scars | Usually three to six sessions, six to eight weeks apart, often with subcision for rolling scars and TCA CROSS for ice-pick scars. |
| Single benign lesion | Planned after examination; a single lesion takes less time. |
| Texture | Set at assessment and reviewed as collagen remodels. |
Suitability is decided at an in-person assessment with Dr Sin Yong. Treatment is usually deferred or an alternative is suggested in these situations:
- Oral isotretinoin within six months
- A tendency to keloid scars
- Active infection or cold sores
- Anyone who cannot keep to strict sun avoidance during healing
Last updated · Content prepared under Dr Sin Yong, Medical Director, IN Eternity Clinic. Results vary between people; suitability is decided at consultation.
Who suits CO2 laser, wrinkles and treating the neck and body
Who is suitable for CO2 laser?
Fractional CO2 laser suits people with acne scars, enlarged pores, rough texture, some types of wrinkles and certain skin growths who can accept about five to seven days of downtime. It is postponed during pregnancy, with active acne or infection, a recent tan, while on isotretinoin or within months of stopping it, and in people who scar or darken easily.
Can CO2 laser treat wrinkles and tighten skin?
Fractional CO2 laser stimulates new collagen, which can soften fine lines and crepey skin, especially around the eyes and mouth, and give mild tightening over three to six months. Deep folds and heavy sagging need other treatments such as fillers, energy-based lifting or surgery. Results vary with skin type and settings.
Can CO2 laser be used on the neck, chest or body?
Yes, but with gentler settings, because skin on the neck, chest and body heals more slowly and scars more easily than the face. It may be used for scars, stretch marks and textured skin. A test patch and a longer gap between sessions are often recommended. Other treatments such as FSX or RF microneedling may suit some body areas better.
Frequently asked questions about CO2 laser Singapore
Does CO2 fractional laser really help?
Yes, for the right problems. Fractional CO2 laser is a well-studied treatment for acne scars, uneven texture and fine wrinkles. It creates tiny columns of controlled injury that the skin repairs with new collagen, so improvement builds over three to six months. It needs several days of downtime, and settings must be chosen carefully in Asian skin to avoid pigmentation.
Can I have CO2 laser while on acne medication?
Tell the doctor about every acne medicine. Topical retinoids and exfoliating acids are usually paused for several days before treatment. After oral isotretinoin, many doctors still wait several months, although recent reviews suggest fractional lasers may be safe sooner in selected patients. Dr Sin Yong decides the timing case by case, and active acne is usually brought under control before resurfacing.
When can I wear make-up after CO2 laser?
Once the crusts have flaked away to pink new skin, which is usually around days five to seven after a full-face fractional session; deeper settings can add a day or two. Until then, keep the skin clean, moist and protected as advised, and use no make-up. Start with gentle, fragrance-free products and use sunscreen every day.
Can CO2 laser completely remove acne scars?
Rarely completely. A course of fractional CO2 laser usually makes rolling and boxcar scars shallower and the texture smoother, and the change continues for months as collagen remodels. Deep ice-pick scars and tethered scars often need other techniques alongside, such as TCA CROSS or subcision. The realistic aim is improvement, not skin with no trace of scarring, and results vary between people.
How long is the downtime for CO2 laser?
Five to seven days of redness, crusting and peeling for a standard fractional session; make-up from about day five; residual pinkness for two to four weeks. See the day-by-day guide.
Is CO2 laser worth the money?
It can be for moderate acne scars, deep texture and wrinkles, because fractional CO2 resurfaces the skin more strongly than gentler lasers, often with fewer sessions. The trade-off is downtime of several days and a risk of temporary darkening in Asian skin. It is poor value for pigment alone or sagging. Results depend on settings, aftercare and the plan, and vary between people.
Is one session of CO2 fractional laser enough?
For mild texture or fine lines, one session can give a visible improvement. Acne scars and deeper wrinkles usually need two to four sessions spaced one to three months apart, because collagen builds gradually and each session is kept to a safe intensity for Asian skin. The final result shows three to six months after the last session. The plan is set at assessment.
Is CO2 laser used for acne scars?
Yes. Fractional CO2 laser is one of the main tools for boxcar and some rolling acne scars, often combined with subcision and TCA CROSS. At IN Eternity Clinic it is used with the SCAR3 protocol. See acne scar treatment in Singapore.
How long is the downtime after CO2 laser?
After fractional CO2 laser, expect redness and swelling for a few days and fine crusting or flaking for about five to seven days. Redness can fade over several weeks. Strict sun protection and aftercare reduce the risk of darkening in Asian skin. See CO2 laser downtime day by day.
What is a fractional laser?
A fractional laser splits its beam into a grid of microscopic columns and leaves bridges of untouched skin between them, so the surface heals faster than when the whole layer is treated. Ablative fractional lasers such as CO2 vaporise tissue in each column; non-ablative ones, such as the FSX laser here, heat without breaking the surface and usually have milder recovery.
What is laser skin resurfacing?
Laser skin resurfacing uses laser energy to injure the outer skin in a controlled way so that it heals with remodelled collagen, improving texture, scars and fine lines. Older fully ablative resurfacing removed the whole surface and took weeks to heal. At IN Eternity Clinic resurfacing is done with the fractional DEKA Tetra Pro CO2 laser or the non-ablative FSX laser, chosen at assessment.
Is CO2 laser better than erbium laser for acne scars?
Not clearly. In 24 Asian patients treated with CO2 on one side of the face and erbium on the other, scars improved by more than half on 65 of 100 CO2 sides and 55 of 100 erbium sides after two sessions, a difference that was not significant. Scar type, settings and pigment risk usually matter more than the laser type.
What can a CO2 laser treat?
Here the fractional CO2 laser is used mainly for acne scars within the SCAR3 (S3) protocol, rough texture and enlarged-looking pores, with lighter passes for texture. Its focused beam treats single lesions such as syringomas and xanthelasma, and selected benign growths after they have been examined. Not every lesion or skin type is suitable, so suitability is decided at assessment.
What is fractional CO2 laser treatment in Singapore?
A fractional CO2 laser treats microscopic columns of skin with 10,600 nm light, so the surface heals in about a week while collagen remodels underneath. At IN Eternity Clinic in Singapore, the CO2 fractional laser used is the DEKA Tetra Pro, for acne scars, texture and selected lesions, with settings planned around pigment risk in Asian skin. Acne scars usually need three to six sessions, six to eight weeks apart.
What is the difference between CO2 laser and fractional CO2 laser?
A fully ablative CO2 laser removes the whole surface layer of the treated area, with one to two weeks of open healing. Fractional CO2 treats a grid of microscopic columns and leaves bridges of intact skin, so the surface usually heals in about a week while collagen keeps remodelling.
How much is CO2 laser in Singapore?
Other Singapore clinics publish fractional CO2 at about S$380 to S$600 per session (read 20 October 2026). The total depends on the area, the protocol and the number of sessions. At IN Eternity Clinic the plan is quoted after assessment; the consultation fee is S$120, waived with any medical treatment.
What is the downtime for CO2 laser?
After a full-face fractional session, expect about five to seven days of redness, swelling and fine crusting, then pinkness that fades over weeks. Lighter settings heal faster. Most people keep the first week free of events.
Is CO2 laser safe for Asian skin?
It can be used in Asian skin with planning. The main risk is post-inflammatory darkening, which is reduced with moderate density, spacing sessions six to eight weeks apart, strict sun protection and early review. It is reduced, not ruled out.
How many CO2 laser sessions are needed for acne scars?
Usually three to six sessions spaced six to eight weeks apart, often combined with subcision for rolling scars and TCA CROSS for ice-pick scars. The number depends on scar type, depth and response.
Does CO2 laser hurt?
Numbing cream is applied for about 45 to 60 minutes and cooled air is used throughout. Most people feel hot prickling during the pass and a sunburn-like warmth for the rest of the day, easing over a day or two.
CO2 laser or FSX laser: which is used?
They are different devices. Fractional CO2 ablates columns of skin for deeper scar and texture change, with about a week of recovery. The FSX laser is non-ablative, with a few days of redness, and suits milder texture. The choice follows the problem and your downtime.
Can CO2 laser remove moles?
Some moles and benign growths can be removed with focused CO2 laser, but only after examination. A mole that is changing, bleeding or uncertain is checked first and is often removed for testing instead of being lasered.
Is CO2 laser good for the skin?
For the right problem, yes: it resurfaces scars, texture and sun damage by removing skin in fine columns so new tissue grows. It is a strong treatment with about a week of recovery and a pigmentation risk in darker skin, so settings are kept conservative and it is not used on skin with active acne, a tan or infection.
How long does a CO2 laser procedure take?
The laser itself usually takes 15 to 30 minutes for the full face. Allow about an hour in total, because numbing cream is applied for 30 to 45 minutes beforehand. Smaller areas such as individual scars or growths take less time. Recovery is separate: most people need about five to seven days for the skin to heal after fractional CO2.
More questions on this topic are answered in the acne and acne scars answers hub.
Book an assessment
IN Eternity Clinic, 9 Scotts Road, #12-01 Pacific Plaza, Singapore 228210. By appointment with Medical Director Dr Sin Yong. Monday to Saturday, 11am to 8pm. WhatsApp or call +65 8815 3008. The consultation fee is waived with any medical treatment.
International KOL — CLASSYS · HIRONIC · DEKA · ALMA · FOTONA · LUTRONIC
References
- Omi T, Numano K. The role of the CO2 laser and fractional CO2 laser in dermatology. Laser Ther 2014;23(1):49-60. doi:10.5978/islsm.14-RE-01
- Manstein D, Herron GS, Sink RK, Tanner H, Anderson RR. Fractional photothermolysis: a new concept for cutaneous remodeling using microscopic patterns of thermal injury. Lasers Surg Med 2004;34(5):426-438. doi:10.1002/lsm.20048
- Alexiades-Armenakas MR, Dover JS, Arndt KA. The spectrum of laser skin resurfacing: nonablative, fractional, and ablative laser resurfacing. J Am Acad Dermatol 2008;58(5):719-737. doi:10.1016/j.jaad.2008.01.003
- Omi T, Kawana S, Sato S, Bonan P, Naito Z. Fractional CO2 laser for the treatment of acne scars. J Cosmet Dermatol 2011;10(4):294-300. doi:10.1111/j.1473-2165.2011.00587.x
- Manuskiatti W, Iamphonrat T, Wanitphakdeedecha R, Eimpunth S. Comparison of fractional erbium-doped yttrium aluminum garnet and carbon dioxide lasers in resurfacing of atrophic acne scars in Asians. Dermatol Surg 2013;39(1 Pt 1):111-120. doi:10.1111/dsu.12030
- Chan HH, Manstein D, Yu CS, et al. The prevalence and risk factors of post-inflammatory hyperpigmentation after fractional resurfacing in Asians. Lasers Surg Med 2007;39(5):381-385. doi:10.1002/lsm.20512
- Cheyasak N, Manuskiatti W, Maneeprasopchoke P, Wanitphakdeedecha R. Topical corticosteroids minimise the risk of postinflammatory hyperpigmentation after ablative fractional CO2 laser resurfacing in Asians. Acta Derm Venereol 2015;95(2):201-205. doi:10.2340/00015555-1899
- Graber EM, Tanzi EL, Alster TS. Side effects and complications of fractional laser photothermolysis: experience with 961 treatments. Dermatol Surg 2008;34(3):301-307. doi:10.1097/00042728-200803000-00003
- Singapore Medical Council. Guidelines on Aesthetic Practices for Doctors (2016 edition). healthprofessionals.gov.sg/smc
- Metelitsa AI, Alster TS. Fractionated laser skin resurfacing treatment complications: a review. Dermatol Surg 2010;36(3):299-306. doi:10.1111/j.1524-4725.2009.01434.x
These sources describe mechanisms and general evidence. They are not a promise of any individual result; suitability is decided at an in-person assessment.