T2 Frax Radiance Tighten & Tone on the DEKA TORO pico laser
T2 Frax Radiance (Tighten and Tone) is IN Eternity Clinic's own protocol on the DEKA TORO. It uses the device in two ways: 785 nm picosecond pulses aimed at pigment, and a longer thermal pulse aimed at dermal collagen. Settings are chosen with Asian skin in mind. The clinic is a DEKA Centre of Excellence, and Medical Director Dr Sin Yong is an International Key Opinion Leader for DEKA. For an overview of pico laser for pigmentation, see pico laser for pigmentation in Singapore.
T2 Frax Radiance is IN Eternity Clinic’s own protocol on the DEKA TORO laser. In one appointment it combines 785 nm picosecond pulses that break up pigment (Tone) with a longer thermal pulse that warms dermal collagen (Tighten). Settings are chosen with Asian skin in mind, and the balance between the two halves is decided by Dr Sin Yong at consultation rather than fixed by a package. Combined with R2 Glow: R2T2 laser in Singapore.
- A meta-analysis reviewed picosecond laser studies specifically in Asian patients with pigmentary disorders, the first to pool this evidence for Asian skin (Dermatol Ther 2021)
- A review of post-inflammatory hyperpigmentation found it is common after inflammation of the skin and affects darker skin more often and more severely, which shapes how treatment is planned in Asian skin (J Clin Aesthet Dermatol 2010)
T2 Frax Radiance at a glance
| Question | T2 Frax Radiance |
|---|---|
| What it is | IN Eternity Clinic’s own pico laser protocol on the DEKA TORO, combining Tighten and Tone in one appointment. |
| Used for | Sun-related pigment, marks left after inflammation, patchy tone and melasma (with caution), plus laxity and surface texture. |
| How it works | Tone: 785 nm picosecond pulses break pigment into fragments by a pressure wave with little heat. Tighten: a longer thermal pulse warms dermal collagen. |
| Typical sessions | A spaced course planned individually after assessment; superficial pigment, deeper pigment and melasma respond on different timelines. |
| Downtime | Redness and warmth for a few hours; treated spots may darken and flake over about a week. |
| When results show | Spots lighten over the weeks after flaking; the collagen response builds over several weeks; change is judged across a course. |
| Who should avoid or wait | Recent tanning (wait); melasma is treated only conservatively; red marks and depressed scars need other treatments. |
| Who performs it | Dr Sin Yong, who sets the balance between Tighten and Tone. |
Dr Sin Yong, Medical Director of IN Eternity Clinic, explains that a pico laser does not bleach the skin; it shatters pigment into fragments the body clears itself, which is why sessions are spaced and settings are chosen for Asian skin.
On this page
In Florence, our Medical Director, Dr Sin Yong, compared notes with DEKA faculty on setting the TORO’s four modes (Pico, Nano, Double and Thermal) for Asian skin. DEKA positions the 785 nm picosecond wavelength, which T2 Frax Radiance uses for Tone, for skin types III to V. Read the clinic news.
Why the protocol is called T2
A typical pico laser session has a single target: pigment. Picosecond pulses were designed for that, and pigment is usually the reason people book.
The TORO, however, can also deliver a slower, heat-based pulse. T2 Frax Radiance was put together so that both uses happen in the same appointment instead of being booked as two separate treatments.
The two Ts are Tighten and Tone. Tighten deals with dermal collagen; Tone deals with pigment. The clinic’s tattoo removal protocol, T2 Targeted Tattoo, is a separate treatment. Each uses its own emission mode and works at its own depth. How much of each a session contains is decided by Dr Sin Yong at consultation, not fixed by a package.
“A pico laser does not bleach the skin. It shatters pigment into fragments the body clears itself.”
Tone: how picosecond pulses act on pigment
The physics explains most of the clinical choices, so it is worth a short explanation.
One picosecond is a trillionth of a second. A pulse that short ends before heat has time to travel into the tissue around the target. The energy arrives as a sudden pressure wave that breaks pigment granules into smaller fragments — a photoacoustic action, not a heating one. The body then clears those fragments over the following weeks.
This is relevant in Singapore because most patients here have Fitzpatrick skin types III to V. That skin holds more melanin, which can absorb energy meant for the target. When a laser leaves too much heat behind, the skin can react with post-inflammatory hyperpigmentation — new pigment, the opposite of the aim. Keeping heat low reduces that particular risk.
For Tone, the TORO is used at 785 nm in picosecond mode, which reaches pigment in both the epidermis and the dermis. The device also has 532 nm and 1064 nm nanosecond outputs for other pigment depths. Tone is used for sun-related pigment, melasma (with caution), marks left after inflammation and patchy tone. It is not a one-session eraser. How TORO sits beside other picosecond platforms is set out in PicoSure, PicoWay, StarWalker and TORO compared.
Tighten: the thermal half
For Tighten, the TORO switches to a longer pulse, which interacts with tissue in a completely different way.
This time heat is the point. Gentle, controlled warming of the dermis triggers a collagen response: the fibres tighten under heat and the tissue remodels over the next several weeks. Tighten is aimed at laxity and surface texture, not colour.
Putting the two together reflects how people actually present. Patchy tone and early slackness or rough texture often appear in the same face. Treating only the colour, or only the texture, can leave the overall picture looking much the same to the patient.
The Platform — DEKA TORO
The device is the DEKA TORO, a Q-switched Nd:YAG laser made by DEKA in Italy. IN Eternity Clinic holds DEKA Centre of Excellence status, and Dr Sin Yong has been invited by DEKA to share his clinical expertise as an International Key Opinion Leader. TORO is one of four DEKA lasers in Singapore used at IN Eternity Clinic, a designated DEKA Centre of Excellence.
The specifications that shape the protocol are: three wavelengths (785 nm picosecond, plus 532 nm and 1064 nm nanosecond); picosecond and nanosecond output in a single device, so a session can switch mechanism without changing machines; a long-pulse thermal mode, which is what allows the Tighten step; repetition rates up to 20 Hz; and spot sizes between 2 and 6 mm with a flat-top beam.
According to DEKA, the 785 nm picosecond output was designed with Fitzpatrick III–V skin, including Asian skin, specifically in view.
T2 Frax Radiance, R2 Glow or 少女光 — which one?
All three are skin-tone protocols at IN Eternity Clinic, but they work on different causes, and the cause decides the choice.
T2 Frax Radiance works on pigment already laid down: the picosecond pulses break up existing deposits. R2 Glow works on low-grade inflammation, which keeps stimulating pigment cells and adds background redness — it addresses a cause rather than the deposit. 少女光 works deeper, at the reticular dermis, and is aimed at redness, pores and laxity.
The decision rests on whether the problem is pigment that is already there, pigment that keeps being made, or change in the dermal structure. Some faces show more than one of these, which is why Dr Sin Yong examines the skin before choosing.
Pico Laser, Q-Switched, or CO2?
Many people come in having read about several lasers and ask which is better. A more useful question is which mechanism matches what is happening in their skin.
Picosecond lasers work mainly by pressure wave and are used for pigment, with lower heat — relevant for darker skin types. Nanosecond Q-switched lasers use a similar principle with a longer pulse and more heat, and still have a place for some pigment depths and for tattoo ink. Fractional CO2 is ablative: it creates tiny columns of controlled injury so the skin rebuilds as it heals, and it is used for texture and scarring, not pigment.
These are not substitutes for each other. A plan may use more than one, and the choice follows the examination, not a preference for a particular machine.
Key Facts
How many T2 Frax Radiance sessions are needed?
An honest number follows assessment, because each concern responds on its own timeline.
| Concern | Usual course | Note |
|---|---|---|
| Superficial sun-related pigment | A spaced course | Spots darken and flake, then lighten between sessions |
| Deeper pigment | A spaced course on a slower timeline | Depth is typed at assessment |
| Melasma | A conservative course | Long-term and relapsing; managed with sun protection |
| Texture and laxity (Tighten) | Across the same course | The collagen response builds over several weeks |
What T2 Frax Radiance results look like over time
Pigment fragments are cleared between sessions, so tone evens out gradually.
| When | What you may notice |
|---|---|
| Day 0 | Redness and warmth for a few hours; spots may look darker. |
| Days 1–7 | Darker spots form fine crusts or flakes, which clear. |
| Weeks 2–4 | Pigment fragments continue to clear; the collagen response from Tighten builds. |
| Across the course | Tone and texture compared with baseline photographs at each review. |
Who should not have T2 Frax Radiance, or should wait?
Some skin waits, and some concerns need a different treatment.
- Recently tanned skin: treatment waits, because darker skin types carry a higher risk of post-inflammatory pigmentation.
- Melasma is not excluded but is treated conservatively, because over-treating it can make it darker.
- Red marks after acne respond better to vascular approaches such as the 675 nm laser, and depressed scars to resurfacing or subcision.
- Active acne is controlled before brown marks are treated; cold sores and new medicines are mentioned first.
What Determines the Cost
Treatment at IN Eternity Clinic is planned individually, so the cost follows the plan rather than a fixed list. The factors that shape it are discussed at consultation:
- Whether tone, tighten, or both. The balance is set at consultation.
- The presentation and pigment depth. Epidermal, dermal and melasma behave differently.
- The number of sessions. A course is planned individually, not sold as a fixed package.
- How the plan is staged. Work spread over time is planned differently from a single visit.
A figure quoted before assessment would not reflect your presentation. Cost is set out clearly at consultation, before anything is agreed.
At IN Eternity Clinic a consultation fee applies, and it is waived if you go ahead with any medical treatment; the fee is S$120. See fees and consultation.
Does it hurt? Comfort and numbing
T2 Frax Radiance uses the DEKA TORO in two ways, and they feel different. The Tone step, with 785 nm picosecond pulses, feels like quick, light snapping on the skin. The Tighten step, with a longer thermal pulse, feels like building warmth rather than snapping. Cooling is used throughout, protective eyewear is worn, and settings are adjusted area by area.
Many people manage without numbing, particularly for maintenance sessions. Numbing cream can be applied for 20 to 30 minutes beforehand if you are sensitive, or if denser pigment is being targeted, which feels sharper. The upper lip and areas over bone tend to feel the most. Afterwards the skin is warm and may look flushed for a few hours, like mild sunburn.
Your T2 Frax Radiance treatment day, step by step
- Assessment with Dr Sin Yong. Pigment is typed by depth, texture and laxity are assessed, and the balance between Tighten and Tone is set. Melasma, recent tanning and any darkening after earlier treatments are discussed first.
- Preparation. Make-up is removed, the skin is cleansed and photographs are taken. Numbing cream is optional, and is applied for 20 to 30 minutes if denser pigment is targeted.
- Tone. With protective eyewear on, 785 nm picosecond pulses are passed over the areas of pigment, sometimes with nanosecond 532 nm or 1064 nm for particular depths.
- Tighten. The TORO is switched to its longer thermal pulse and passed over the areas planned for texture and firmness; this step feels like building warmth.
- Straight after. Redness and warmth for a few hours, and spots may look darker. Moisturiser and sunscreen go on, and most people return to work.
- The next days and review. Spots may flake over the first week, as described below. The next session follows the interval set for you, and progress is compared with your baseline photographs.
What to expect, day by day
Recovery after T2 Frax Radiance is short; what you see depends on whether discrete spots or general tone were treated.
- Day 0. Redness and warmth for a few hours, and possibly mild swelling. Distinct pigment spots can look darker straight away. Use gentle skincare and sunscreen.
- Days 1–3. Darker spots may form fine crusts or flakes as fragmented pigment rises. Do not scrub or pick, and keep strong actives paused as advised.
- Week 1. Flaking clears and tone starts to look more even. Daily sun protection is essential.
- Weeks 2–4. The body continues clearing pigment fragments, and the collagen response from Tighten builds. The next session follows the interval set for you.
- Review. Pigment and texture are compared with baseline photographs. Melasma plans stay conservative, and any darkening is reported early.
T2 Frax Radiance side effects and risks
Lower heat in the Tone step reduces, but does not remove, the risk of pigment change in Asian skin. The Tighten step adds heat by design, so it is dosed for your skin type.
Common, and usually settling within days
- Redness, warmth and mild swelling for a few hours.
- Darker spots flaking over about a week.
- Dryness for a day or two.
Uncommon
- Post-inflammatory darkening two to four weeks later.
- Melasma flaring if it is treated too strongly.
- Pale spots after treatment that is too frequent.
- Rarely, blistering from the thermal step.
When to call the clinic
- Blistering, weeping or crusting beyond the treated spots.
- Redness or pain that increases after the first day.
- Darkening that spreads in the weeks after.
A fuller recovery guide is in pico laser downtime, day by day.
More questions answered
Can I go back to work the same day after T2 Frax Radiance?
Yes. Most people have redness for a few hours and can apply make-up later the same day or the next morning. If discrete sun spots are treated, they may darken and flake for several days, which is easy to cover. Retinoids and exfoliating acids are paused for the short period advised.
Will people notice I had a pico laser?
Usually not beyond a few hours of redness. Over a course, people tend to notice more even tone and smoother texture. If individual dark spots are targeted, they may look darker and flake for several days before clearing, so plan around important events if needed.
How soon will I see results from T2 Frax Radiance?
Distinct spots usually darken and flake within the first week, then lighten over the following weeks as fragments are cleared. The collagen response from the Tighten step builds more slowly, over several weeks. Most people judge the change across a course rather than after one session, and progress is reviewed against baseline photographs.
Does T2 Frax Radiance help acne marks?
It can help the flat brown marks left after acne, once active acne is controlled, because those marks are pigment that the Tone step can break up. Red marks and depressed scars are different problems: red marks respond better to vascular approaches such as the 675 nm 少女光 laser, and scars to resurfacing or subcision.
Can T2 Frax Radiance treat the neck or hands?
Sometimes. Sun spots on the hands and uneven tone on the neck can be treated, but the skin there is thinner and heals more slowly than the face, so settings are gentler and crusts can last longer. Whether these areas are suitable, and which step is used, is decided at assessment.
What should I avoid before T2 Frax Radiance?
Avoid tanning and long midday sun for about two weeks beforehand, and pause retinoids and exfoliating acids for the few days advised. Tell the clinic about cold sores, new medicines or recent treatments such as skin boosters. If you have an event, book at least a week or two ahead in case spots flake.
For how a pico session feels, see is pico laser painful.
References
- Dong W, Wang N, Yuan X, et al. Treatment of pigmentary disorders using picosecond laser in Asian patients: A meta-analysis and systematic review. Dermatol Ther 2021;34(1):e14709. doi:10.1111/dth.14709
- Koh YP, Tan AWM, Chua SH. Treatment of Laser-Responsive Dermal Pigmentary Conditions in Type III-IV Asian Skin With a 755-nm Picosecond Pulse Duration Laser: A Retrospective Review of Its Efficacy and Safety. Dermatol Surg 2020;46(11):e82-e87. doi:10.1097/DSS.0000000000002332
- Davis EC, Callender VD. Postinflammatory hyperpigmentation: a review of the epidemiology, clinical features, and treatment options in skin of color. J Clin Aesthet Dermatol 2010;3(7):20-31. PMID 20725554
- Health Sciences Authority, Singapore. Infosearch — registered medical devices and health products. hsa.gov.sg
- Singapore Medical Council. Guidelines on Aesthetic Practices for Doctors (2016 edition). healthprofessionals.gov.sg/smc
These sources describe mechanisms and general evidence. They are not a promise of any individual result; suitability is decided at an in-person assessment.
Frequently Asked Questions
It is a laser whose pulses last picoseconds (trillionths of a second). The pulse ends before heat spreads, so pigment is broken up by a pressure wave rather than by heat. Lower heat matters for Asian skin, which is more prone to post-inflammatory hyperpigmentation.
Tighten and Tone. Tighten uses a longer thermal pulse to prompt a collagen response in the dermis. Tone uses picosecond pulses to break up pigment. The two steps act on different targets at different depths within one session. It is a different treatment from T2 Targeted Tattoo, the clinic’s tattoo removal protocol on the same laser.
The DEKA TORO, a Q-switched Nd:YAG laser with picosecond and nanosecond outputs at three wavelengths (785 nm picosecond; 532 nm and 1064 nm nanosecond), a long-pulse thermal mode and repetition rates up to 20 Hz.
At 785 nm with picosecond pulses, the laser reaches both superficial and deeper pigment while leaving less heat behind. Many older laser settings were worked out on fairer skin; in Fitzpatrick III–V skin, common in Singapore, lower heat reduces the chance of triggering new pigment.
The difference is pulse length. Nanosecond pulses carry more heat with the pressure effect; picosecond pulses are about a thousand times shorter, so more of the action is mechanical. The TORO has both, so Dr Sin Yong can use either within the same session.
Tone covers superficial and deeper pigment, sun-related pigment, melasma and marks left after inflammation. Tighten covers laxity and texture through a collagen response. The balance between them is set for each patient at IN Eternity Clinic after assessment.
Melasma needs particular care. It is a long-term condition that tends to recur, not a single mark to remove, and over-treating it can make it darker. Melasma plans are kept conservative and only start after an in-person assessment.
Most people feel a light, quick snapping on the skin. Sensitivity differs from person to person and across the face, and settings and comfort measures are adjusted during the session. Protective eyewear is worn throughout.
That depends on what is being treated, so an honest number cannot be given before assessment. Superficial pigment, deeper pigment and melasma all respond on different timelines. Dr Sin Yong plans the course after seeing your skin rather than selling a fixed package.
Cost depends on whether tone, tighten or both are planned, the presentation and pigment depth, and how many sessions the plan involves. Because the right approach differs between patients, a figure quoted before assessment would not be meaningful. Pricing is discussed at consultation at IN Eternity Clinic.
A pico laser delivers pulses lasting about a trillionth of a second — short enough that the pulse ends before meaningful heat spreads into surrounding tissue. Instead of burning pigment, it generates a rapid pressure wave that fragments pigment particles mechanically, a photoacoustic effect. On the DEKA TORO platform used at IN Eternity Clinic, the 785 nm picosecond emission is suited to the pigment depths and skin types most common in Singapore.
Pico laser is delivered as a spaced course rather than a fixed schedule, because pigment in the epidermis behaves differently from pigment in the dermis, and melasma behaves differently again. The interval between sessions is planned individually at IN Eternity Clinic after in-person assessment.
Most patients describe a warm or light prickling sensation during the T2 Frax Radiance pico laser, managed with cooling and adjustable settings. Numbing can be applied where helpful. The sensation passes quickly, and what to expect is explained beforehand at IN Eternity Clinic.
Results from the T2 Frax Radiance pico laser build in the weeks after each session as the skin renews, and are commonly maintained with periodic treatment. The interval depends on your skin and concern, and is planned individually.
Laser toning usually means repeated low-energy passes, often with a nanosecond Q-switched laser, to lighten pigment gradually. T2 Frax Radiance uses picosecond pulses for pigment and adds a separate thermal pulse for dermal collagen, so tone and texture are addressed in the same visit.
It can be, with care. Darker skin types carry a higher risk of post-inflammatory pigmentation, so energy is kept conservative, sessions are spaced, and recent tanning is a reason to wait. Sun protection between sessions is essential.
Often, yes. The laser is done first and the booster afterwards, so the injection points are not exposed to laser heat. Whether to combine them on one day depends on your skin and is decided at assessment.
Consult at IN Eternity Clinic
Every treatment plan is set by Medical Director Dr Sin Yong, tailored to your specific concern for a natural outcome. Consultations are by appointment at 9 Scotts Road, #12-01 Pacific Plaza, Singapore 228210.
Book My Appointment →