
Fotona StarWalker vs PicoSure, PicoWay and TORO: Pico Lasers Compared
Fotona StarWalker vs pico laser is not a contest: the StarWalker PQX is a picosecond laser that also fires Q-switched pulses at 1064 and 532 nm, while PicoSure centres on 755 nm. Wavelength matters more than brand.
WhatsApp to Enquire →Key facts ↓PicoSure, PicoWay, Fotona StarWalker PQX and DEKA TORO are all picosecond lasers that break pigment with ultra-short pulses. PicoSure is built around 755 nm and PicoWay around 1064 and 532 nm; StarWalker PQX and TORO also offer Q-switched pulses. IN Eternity Clinic uses StarWalker PQX and TORO. Treatments and sessions: pico laser in Singapore.
On this page
- What a picosecond laser does: delivers pulses so short that pigment shatters mainly by a pressure wave rather than heat.
- Why short pulses matter: less heat spreads to surrounding skin, which can lower the risk of post-inflammatory pigmentation in Asian skin.
- Wavelength decides the target: 532 nm suits superficial brown pigment and red ink; 755 and 785 nm suit brown and some dermal pigment; 1064 nm penetrates deepest and suits dark ink and darker skin.
- PicoSure: a Cynosure platform built around 755 nm, with 532 nm on newer versions and a focusing lens for fractional skin treatment.
- PicoWay: a Candela platform built around 1064 and 532 nm, with additional handpieces and fractional options.
- Fotona StarWalker PQX: Nd:YAG-based picosecond and Q-switched pulses at 1064 and 532 nm, with fractional modes; used at IN for pigment, tattoo removal and laser toning.
- DEKA TORO: 785 nm picosecond plus Q-switched 1064 and 532 nm; used at IN for the T2 Frax Radiance protocol.
- Diagnosis first: sun spots, freckles, melasma, Hori’s naevus and post-inflammatory marks respond differently to any laser.
- A review of picosecond lasers concluded they are a major advance for tattoo removal but may be less effective for some cosmetic uses such as melasma (Laser Ther 2017)
- A systematic review of 77 studies rated picosecond laser evidence as level I for tattoo removal, level I–IV for benign pigmented spots and level II for melasma and skin rejuvenation (Lasers Surg Med 2021)
- A review of post-inflammatory hyperpigmentation found it is common after inflammation of the skin and affects darker skin more often and more severely, which shapes how treatment is planned in Asian skin (J Clin Aesthet Dermatol 2010)
Fotona StarWalker vs other pico lasers: the short answer
Yes, the Fotona StarWalker PQX is a pico laser. The practical difference is that it, like the DEKA TORO, also fires Q-switched nanosecond pulses, so one platform can switch pulse type to suit the pigment.
| Platform | Picosecond pulses | Q-switched pulses | Core wavelengths | At IN Eternity Clinic |
|---|---|---|---|---|
| Fotona StarWalker PQX | Yes | Yes | 1064 and 532 nm | Yes — pigment, tattoo and toning |
| DEKA TORO | Yes (785 nm) | Yes (1064 and 532 nm) | 785, 1064 and 532 nm | Yes — T2 Frax Radiance |
| PicoSure | Yes | No | 755 nm (532 nm on newer versions) | — |
| PicoWay | Yes | No | 1064 and 532 nm | — |
The table below the fold compares extra modes in more detail. For most people, the choice of wavelength and settings for their pigment matters more than the name on the machine.
What makes a laser a “pico” laser?
A picosecond is a trillionth of a second. Picosecond lasers deliver pulses in the hundreds of picoseconds, roughly a thousand times shorter than the nanosecond pulses of traditional Q-switched lasers. At that speed, energy is absorbed by a pigment particle faster than heat can escape from it. The particle is stressed by a pressure wave and fractures into fragments, an effect described as photoacoustic rather than photothermal. The body then clears the fragments over the following weeks.
Two practical consequences follow. Smaller fragments may be cleared more readily, which is why picosecond lasers were first adopted for tattoo removal, including blue and green inks that respond poorly to older lasers. And less heat reaching the surrounding skin can reduce the risk of the skin reacting with post-inflammatory hyperpigmentation, a real concern in Singapore where most skin is Fitzpatrick type III to V. Lower risk is not no risk, and settings still matter.
Several platforms also offer fractional or lens-array modes, which split the beam into many tiny spots. These create microscopic zones of injury inside the skin that prompt collagen remodelling, and are used for texture, pores and fine acne scarring.

Why does wavelength matter more than brand?
Each wavelength is absorbed differently. Shorter wavelengths such as 532 nm are strongly absorbed by melanin and haemoglobin but penetrate shallowly, suiting superficial brown spots and red or orange ink. Mid wavelengths around 730 to 785 nm reach a little deeper and are absorbed by melanin and by blue, green and black inks. 1064 nm penetrates deepest and is absorbed less by melanin, which makes it the gentler choice for darker skin, dermal pigment and black ink.
In practice, the most important decision is not which brand to use but which wavelength, spot size, fluence and pulse mode suit the pigment in front of you and the skin it sits in. A platform with more wavelengths gives the operator more options. It does not make the decision for them.
“Pigment is not one problem. I name each type on the cheek first, then choose the wavelength. The brand of laser comes last.”
PicoSure vs PicoWay vs StarWalker PQX vs TORO
PicoSure, from Cynosure, was among the first picosecond lasers for aesthetic use. It is built around a 755 nm alexandrite wavelength, with 532 nm added on newer versions, and is known for its focusing lens array used in fractional skin treatment. PicoWay, from Candela, is built around 1064 and 532 nm with additional handpieces at other wavelengths and fractional options.
Fotona StarWalker PQX is an Nd:YAG-based platform offering picosecond and Q-switched pulses at 1064 and 532 nm, with fractional and other modes, giving flexibility to change pulse type within one session. Q-switched nanosecond pulses still have a place, for example for some superficial pigment and certain inks, which is why platforms that offer both pulse types remain useful. DEKA TORO combines a 785 nm picosecond wavelength with Q-switched 1064 and 532 nm, so it can treat pigment with picosecond pulses and also deliver a longer thermal pulse aimed at dermal collagen.
| Platform | Core wavelengths | Extra modes |
|---|---|---|
| PicoSure | 755 nm (532 nm on newer versions) | Focusing lens array |
| PicoWay | 1064 and 532 nm | Additional handpieces, fractional |
| Fotona StarWalker PQX | 1064 and 532 nm | Picosecond and Q-switched, fractional |
| DEKA TORO | 785 nm pico; 1064 and 532 nm Q-switched | Pigment and thermal collagen modes |

What is pico laser used for?
The common indications are tattoo removal, sun spots and freckles, Hori’s naevus and other dermal pigment, post-inflammatory marks after acne, and, with care, melasma. Fractional modes are used for texture, pores and fine scarring. Each indication responds differently. Sun spots and freckles often clear in a small number of sessions. Dermal pigment such as Hori’s naevus needs a longer series. Melasma is managed rather than cleared, using low-energy settings over many sessions alongside sun protection and skincare, because aggressive treatment can make it darker.
This is why pigment is typed before any laser is chosen. Several types often sit together on the same cheek, and treating them all with one setting is the most common reason pigment treatment disappoints. For tattoos specifically, see picosecond vs Q-switched tattoo removal.
Fotona StarWalker or another pico laser: which suits which concern?
Choose by the pigment, not the badge: superficial sun spots respond to 532 nm, deeper pigment and dark ink to 1064 or 755–785 nm, and melasma to low-energy toning over many sessions.
| Concern | Wavelength or mode usually chosen | Platforms that offer it | Note |
|---|---|---|---|
| Sun spots, freckles | 532 nm, picosecond or Q-switched | StarWalker PQX, TORO, PicoWay; PicoSure on newer versions | Spots darken and crust for about a week |
| Dermal pigment such as Hori’s naevus | 1064 nm, or 755–785 nm | All four | A longer series spaced weeks apart |
| Melasma | Low-energy 1064 nm toning | StarWalker PQX, TORO, PicoWay | Managed rather than cleared; aggressive settings can darken it |
| Black ink | 1064 nm | StarWalker PQX, TORO, PicoWay | Several sessions spaced weeks apart |
| Blue or green ink | 755–785 nm | PicoSure, TORO | These colours respond poorly to 1064 nm alone |
| Texture, pores, fine acne scars | Fractional or lens-array mode | All four | Redness or faint dots for a day or two |
At IN Eternity Clinic the choice is between the Fotona StarWalker PQX and the DEKA TORO (T2 Frax Radiance), after each pigment on the face has been named.
Why do settings matter so much in Asian skin?
Skin with more melanin absorbs more of the laser energy intended for the target. When too much energy is absorbed by the surrounding skin, the result can be post-inflammatory hyperpigmentation, a darkening that can take months to fade, or, with repeated aggressive toning, patches of lighter skin. Both are more likely in Fitzpatrick types IV and V, which are common in Singapore.
Picosecond pulses help by delivering less heat, but the choice of wavelength, spot size, energy and interval between sessions matters at least as much. Longer wavelengths such as 1064 nm are absorbed less by epidermal melanin and are often chosen for darker skin and deeper pigment. Sessions are spaced to let any inflammation settle, sun protection is non-negotiable, and a test area may be used for sensitive or previously reactive skin. Hot, humid weather and outdoor lifestyles in Singapore make that aftercare particularly important.
Can two pico lasers, or two pulse types, be used in one session?
They can, and some plans pair a picosecond pass for pigment with a Q-switched or fractional pass. Each extra pass adds heat, so in Asian skin the useful question is which setting each pigment needs.
A platform with both pulse types, such as the StarWalker PQX or TORO, lets the setting change within one visit without changing machines. That flexibility helps when a sun spot and diffuse pigment sit on the same cheek. It is not a reason to treat everything at once: stacking passes on darker or melasma-prone skin raises the risk of post-inflammatory darkening, which is why sessions are often kept simple and spaced three to six weeks apart.
Recovery after each kind of pass is set out in pico laser downtime, day by day.
What should you ask about any pico laser treatment?
Rather than asking which brand a clinic uses, it is more useful to ask what type of pigment you have, which wavelength will be used for it and why, how many sessions are expected, how darkening or irritation will be handled if it happens, and who performs the treatment. A clinic that can answer these clearly is more likely to plan the treatment around your skin than around its equipment.
How is pico laser planned at IN Eternity Clinic?
IN Eternity Clinic uses two picosecond platforms. The Fotona StarWalker PQX handles pigment, tattoo and toning work (the R2 Glow protocol runs separately on the Lutronic Clarity II), and T2 Frax Radiance runs on the DEKA TORO, combining 785 nm picosecond pulses for pigment with a longer thermal pulse for dermal collagen.
Dr Sin Yong examines the skin, identifies each type of pigment, asks about previous treatments, hormones and sun habits, and then chooses the platform, wavelength and settings. For many people the plan also includes skincare, sun protection and sometimes medical treatment. For an overview of how pigment is handled, see pico laser for pigmentation; for ink, see tattoo removal.
What does pico laser feel like, and what happens afterwards?
Most people describe quick snapping or flicking sensations on the skin. Numbing cream and cooling are used for stronger settings and for tattoos. After pigment treatment, the skin is usually pink for a few hours. Treated spots may darken and flake over about a week before fading. Tattoo treatment can cause whitening, swelling and occasionally blistering for a few days. Sun protection is essential between sessions, and any sign of darkening or irritation should be reported so that the plan can be adjusted.
Sessions for pigment are usually spaced three to six weeks apart, and for tattoos often longer, to give the body time to clear fragments and the skin time to settle. Rushing the interval rarely speeds the result and can increase irritation. Gentle skincare without strong acids or retinoids is usually advised for a few days after each session, and treatment is postponed if the skin is tanned, sunburnt or irritated.
Common myths, answered
- Myth: All pico lasers are the same.
Fact: They share the picosecond principle but differ in wavelengths, extra modes and fractional options, which changes what each is suited to. - Myth: Pico laser cannot cause pigmentation.
Fact: The risk of post-inflammatory pigmentation is lower than with some older lasers, but not absent, especially in darker or melasma-prone skin. - Myth: One session clears melasma.
Fact: Melasma is chronic. Low-energy treatment over many sessions, with sun protection and skincare, aims for control rather than clearance. - Myth: The newest platform always gives the fastest result.
Fact: Pigment type, depth, skin type and settings decide the outcome more than the age or brand of the laser.
Results, timing after facials, and what else pico treats
Does the pico laser brand change how long results last?
Cleared sun spots and freckles stay away unless new sun damage forms new ones, and tattoo ink that is removed does not come back. Melasma and uneven tone tend to return with sun, heat or hormones, so maintenance sessions and daily sunscreen are part of the plan. The brand of pico laser matters less than the diagnosis and aftercare.
How soon can I have pico laser after a facial or peel?
Wait about one to two weeks after a facial with extraction or a light peel, and longer after a medium-depth peel, so the skin barrier recovers and the risk of irritation and darkening stays low. Tell the doctor about any recent treatments, waxing or threading on the face before your session.
What else can pico laser treat besides pigment?
Fractional pico can improve shallow acne scars, enlarged pores, fine lines and rough texture by building collagen with little downtime. Pico is also used for tattoo removal of most ink colours. Deep scars and sagging need other treatments such as RF microneedling, CO2 laser or skin tightening.
Frequently asked questions about PicoSure laser
What are the negative effects of pico laser?
Common short-term effects are redness, mild swelling and pinpoint bleeding or crusting for a few days, depending on settings. Less common effects include temporary darkening (post-inflammatory hyperpigmentation), light patches (hypopigmentation), blistering and, with repeated high-energy sessions, mottled skin. Correct diagnosis, conservative settings for Asian skin and sun protection reduce these risks.
Why is my pigmentation getting darker after pico laser?
Darkening after pico laser is usually post-inflammatory hyperpigmentation, a reaction to heat and inflammation that is more common in Asian skin, or a flare of melasma triggered by energy that was too strong. Sun exposure afterwards makes it worse. It usually fades over weeks to months with sun protection, lightening creams and a pause in laser. See your doctor if it happens.
Is PicoSure laser in Singapore available at IN Eternity?
The PicoSure laser offered by some Singapore clinics uses a 755 nm picosecond wavelength. IN Eternity Clinic uses the Fotona StarWalker PQX and DEKA TORO instead, which cover 1064, 532 and 785 nm. The wavelength matched to your pigment matters more than the brand.
Is PicoSure laser in Singapore different from other pico lasers?
PicoSure laser in Singapore uses a 755 nm picosecond wavelength (PicoSure Pro is a newer version). Other pico lasers use different wavelengths, such as 1064 and 532 nm. Each suits different pigments and inks. IN Eternity uses the Fotona StarWalker PQX and DEKA TORO.
What is the PicoSure laser?
PicoSure is a picosecond laser made by Cynosure and was among the first picosecond lasers for aesthetic use. It is built around a 755 nm alexandrite wavelength, with 532 nm added on newer versions, and is known for a focusing lens array used for fractional skin treatment. It is used for pigment and tattoos.
How does a pico laser machine work?
A pico laser delivers pulses lasting hundreds of picoseconds, a picosecond being a trillionth of a second, roughly a thousand times shorter than a Q-switched nanosecond pulse. Pigment or ink absorbs the energy faster than heat can escape, so the particle fractures from a pressure wave, a photoacoustic effect. The body then clears the fragments over the following weeks.
Does the brand of pico laser matter?
Less than the wavelength and settings. PicoSure, PicoWay, StarWalker PQX and DEKA TORO all deliver picosecond pulses but differ in wavelengths and in whether Q-switched pulses are also available. For most people, matching the wavelength and energy to the type and depth of pigment and to the skin matters more than the name on the machine.
Which pico lasers does IN Eternity Clinic use instead of PicoSure?
Two picosecond platforms: the Fotona StarWalker PQX, used for pigment, tattoo and toning work, and the DEKA TORO, used for T2 Frax Radiance, which combines 785 nm picosecond pulses for pigment with a longer thermal pulse for dermal collagen. Both also offer Q-switched pulses, so the setting can change within one visit when needed.
Which pico laser is the strongest?
Strength is not a useful way to compare them. They differ in wavelengths and modes, and the right choice depends on the pigment or ink colour, its depth and your skin type. Too much energy for the skin is a common cause of rebound pigmentation.
Is pico laser safe for Asian skin?
Picosecond pulses deliver less heat to surrounding skin than older lasers, which helps in Asian skin. Post-inflammatory pigmentation can still occur, so wavelengths, energy, spacing between sessions and sun protection are chosen with your skin type and pigment history in mind.
How many pico laser sessions will I need?
It depends on what is being treated. Freckles and sun spots may respond in a few sessions, dermal pigment such as Hori’s naevus needs more, tattoos usually need several spaced weeks apart, and melasma is managed with a longer low-energy series.
What is the difference between pico and Q-switched lasers?
Both use very short pulses to break pigment. Picosecond pulses are roughly a thousand times shorter than Q-switched nanosecond pulses, giving a stronger pressure effect with less heat. Q-switched pulses still have uses, which is why some platforms offer both.
Can pico laser treat melasma?
It can be part of a melasma plan using low-energy settings over many sessions, together with sun protection, skincare and sometimes oral treatment. Melasma is chronic and can worsen with aggressive treatment, so the aim is control rather than clearance.
How much does pico laser cost in Singapore?
Cost depends on the area, the pigment type, the number of sessions, the platform and protocol, and whether other treatments are combined. At IN Eternity Clinic, Dr Sin Yong explains the plan and gives a written quote after assessment, rather than a fixed figure.
Is Fotona StarWalker a pico laser?
Yes. The StarWalker PQX delivers picosecond pulses and also Q-switched nanosecond pulses at 1064 and 532 nm, with fractional and other modes. Having both pulse types on one platform lets the setting be matched to the pigment.
What is the difference between Fotona StarWalker and PicoSure?
PicoSure is built around a 755 nm alexandrite wavelength and delivers picosecond pulses. StarWalker PQX is Nd:YAG-based, at 1064 and 532 nm, and offers both picosecond and Q-switched pulses. Both treat pigment and tattoos; which suits depends on the pigment type, its depth and your skin.
Is PicoWay or PicoSure better?
Neither is better in every case. They use different wavelengths, which suit different pigments and ink colours. The useful question is which wavelength and setting suit your pigment, and how the clinic will reduce the risk of darkening in Asian skin.
Is Fotona StarWalker suitable for melasma?
It can be part of a melasma plan, using low-energy 1064 nm toning over many sessions with sun protection and skincare. Melasma is chronic and can darken with aggressive treatment, so the aim is control rather than clearance, and the plan is decided after the pigment has been examined.
Is R2 Glow the same as the Fotona StarWalker?
No. R2 Glow is IN Eternity Clinic’s brightening protocol on a different device, the Lutronic Clarity II, which uses 755 nm and 1064 nm wavelengths. The Fotona StarWalker PQX is used for pigment, tattoo removal and laser toning.
Is pico laser better than microneedling?
They do different jobs. Pico laser targets pigment and ink with very short pulses and, with special lenses, can also soften fine texture. Microneedling makes tiny channels that trigger collagen remodelling, which suits acne scars and enlarged pores. For scarring with uneven tone, the two are sometimes combined weeks apart. The choice follows the main skin concern.
Which is better, pico laser or HIFU?
Neither is better overall, because they treat different layers. Pico laser works in the skin on pigment, ink and fine texture. HIFU delivers focused ultrasound deeper, to the tissue that supports the face, to lift and tighten. Someone with sun spots and early sagging might have both, planned separately. Assessment decides which concern comes first.
Book an assessment
IN Eternity Clinic, 9 Scotts Road, #12-01 Pacific Plaza, Singapore 228210. By appointment with Medical Director Dr Sin Yong. Monday to Saturday, 11am to 8pm. WhatsApp or call +65 8815 3008.
International KOL — CLASSYS · HIRONIC · DEKA · ALMA · FOTONA · LUTRONIC
References
- Kasai K. Picosecond Laser Treatment for Tattoos and Benign Cutaneous Pigmented Lesions (Secondary publication). Laser Ther 2017;26(4):274-281. doi:10.5978/islsm.17-RE-02
- Wu DC, Goldman MP, Wat H, Chan HHL. A Systematic Review of Picosecond Laser in Dermatology: Evidence and Recommendations. Lasers Surg Med 2021;53(1):9-49. doi:10.1002/lsm.23244
- Brauer JA, Reddy KK, Anolik R, et al. Successful and rapid treatment of blue and green tattoo pigment with a novel picosecond laser. Arch Dermatol 2012;148(7):820-823. doi:10.1001/archdermatol.2012.901
- Davis EC, Callender VD. Postinflammatory hyperpigmentation: a review of the epidemiology, clinical features, and treatment options in skin of color. J Clin Aesthet Dermatol 2010;3(7):20-31. PMID 20725554
- Health Sciences Authority, Singapore. Infosearch — registered medical devices and health products. hsa.gov.sg
These sources describe mechanisms and general evidence. They are not a promise of any individual result; suitability is decided at an in-person assessment.