
Yellow Laser vs Pico Laser vs Laser Toning: Redness, Glow and Pigment
Dr Sin Yong explains how yellow laser differs from pico and toning, and what is used for redness here instead. For the treatment at IN Eternity, see laser toning in Singapore.
Treatment page: pico laser in Singapore.
WhatsApp to Enquire →Key facts ↓Yellow laser (577–578 nm) mainly targets small blood vessels, so it is used for redness, fine vessels and red acne marks. Pico laser breaks up pigment with very short pulses, and laser toning evens tone gently over a course. Redness is treated here with the 675 nm 少女光 laser and medical care, and pigment with pico or toning. See also our guide to pico laser benefits. See also our guide to pico laser price in Singapore. See also: Is pico laser painful?
On this page
- Yellow laser: 577–578 nm light absorbed mainly by oxyhaemoglobin in small vessels; also absorbed by melanin.
- Pico laser: picosecond pulses that fragment pigment, mainly by a pressure effect.
- Laser toning: low-fluence Q-switched 1064 nm Nd:YAG over the whole face, across a course.
- Rule of thumb: redness and vessels: vascular laser; brown pigment: pico or toning.
- At IN Eternity Clinic: 675 nm 少女光 laser and LDM for redness; pico and toning for pigment.
- Consultation: S$120, waived with any medical treatment. IN Eternity Clinic, 9 Scotts Road, #12-01 Pacific Plaza.
- A review of melasma describes it as common and hard to treat, driven by female hormones on a predisposed genetic background as well as sun (Pigment Cell Melanoma Res 2018)
- The principle behind modern lasers, selective photothermolysis, showed that suitably brief pulses absorbed by a target can damage pigmented structures while sparing the surrounding skin (Science 1983)
- A case series of 14 Chinese women described mottled loss of pigment after repeated low-fluence Q-switched 1064 nm laser toning (6 to 50 sessions, mean 22) (Lasers Surg Med 2010)
What is yellow laser, and why compare it with pico and laser toning?
“Yellow laser” is the name used for lasers that emit yellow light at about 577 to 578 nm. Two kinds are common: copper bromide lasers at 578 nm, often paired with a 511 nm green beam, and optically pumped semiconductor lasers at 577 nm. In Singapore they are promoted for facial redness, rosacea, fine visible vessels, red acne marks and a brighter “glow”, and sometimes for melasma.
People searching for yellow laser are usually choosing between several “glow” lasers, and the two they meet most often are pico laser and laser toning. The three are not versions of the same thing. They aim at different targets in the skin, so the useful question is not which is stronger but which target your skin actually needs treated.
How do yellow laser, pico laser and laser toning work?
All three rely on selective photothermolysis: light of a chosen wavelength is absorbed by a particular target, and the pulse is timed to affect that target while sparing the tissue around it. What differs is the target.
- Yellow laser (577–578 nm). Oxyhaemoglobin, the red pigment in blood, absorbs strongly near 577 nm. Yellow light is therefore taken up by small blood vessels in the upper dermis, which is why it is used for redness and fine vessels. Melanin also absorbs yellow light, so settings must be cautious in darker or tanned skin.
- Pico laser. Picosecond pulses, trillionths of a second long, break pigment into tiny fragments mainly by a pressure effect rather than heat. The body then clears the fragments. At IN Eternity Clinic pico treatment uses the Fotona StarWalker PQX and DEKA TORO.
- Laser toning. A Q-switched 1064 nm Nd:YAG laser at low energy is passed evenly over the whole face, many times across a course. Each session does little; the effect on uneven tone builds gradually. At IN Eternity Clinic laser toning uses the DEKA TORO.
Put simply: yellow laser is a vessel laser that also touches pigment; pico and toning are pigment lasers that do little for vessels.
Yellow laser vs pico laser vs laser toning compared
| Yellow laser | Pico laser | Laser toning | |
|---|---|---|---|
| Main target | Small blood vessels (oxyhaemoglobin) | Pigment (melanin), tattoo ink | Pigment, gently and evenly |
| Wavelength | 577–578 nm (some add 511 nm) | Commonly 1064, 532 or 755 nm | 1064 nm Nd:YAG |
| Pulse | Longer pulses to heat vessels | Picoseconds, mainly photoacoustic | Nanoseconds at low fluence |
| Usually used for | Redness, fine vessels, red acne marks | Sun spots, freckles, some dermal pigment, acne marks | Dull, uneven tone; part of melasma care |
| Less suited to | Brown pigment alone; tanned skin | Redness and vessels | Redness and vessels; discrete spots |
| Typical course | A few sessions, weeks apart | One to several sessions by target | A series, one to a few weeks apart |
| Usual recovery | Redness and mild swelling for hours to days | Redness; pinpoint crusts on treated spots | Mild redness for hours |
Redness, glow or pigment: which kind of laser matches which concern?
| Concern | What is usually driving it | Kind of laser that targets it | What IN Eternity Clinic uses |
|---|---|---|---|
| Persistent redness or rosacea | Widened small vessels, inflammation, triggers | Vascular lasers (yellow, pulsed dye, KTP) or 675 nm | 少女光 675 nm laser, rosacea treatment, barrier care |
| Fine visible vessels | Dilated capillaries | Vascular lasers | Assessed individually; see facial thread veins |
| Red acne marks (PIE) | Small vessels left after inflammation | Vascular lasers or 675 nm; time | Red and dark acne marks |
| Brown acne marks (PIH) | Excess melanin after inflammation | Pico or toning, gently | Pico or laser toning with sun protection |
| Sun spots and freckles | Melanin in the upper skin | Pico laser | Pico laser |
| Melasma | Pigment cells kept active by sun, hormones and dermal signals, including vessels | Gentle pigment lasers within a medical plan | Melasma treatment |
| Dull skin, wanting “glow” | Texture, dehydration, uneven tone or redness | Depends on which of these dominates | R2 Glow, LDM facial |
“Glow” is the hardest of these to define. A face can look dull because of redness, uneven pigment, rough texture or dehydration, and each answers to something different. Choosing a laser for glow before deciding which of these is the problem is how people end up with a course that changes little.
“Glow is not a wavelength. Work out whether the problem is redness, pigment or texture, and the right laser is usually obvious.”
Yellow laser for melasma and rosacea: what does the evidence show?
Melasma is now understood as more than excess pigment. Studies of melasma skin show more and larger small blood vessels than in nearby normal skin, and vascular signals appear to keep pigment cells active. That is the rationale for using a vascular laser in melasma. In one study of Asian patients with melasma, a copper bromide yellow laser (578 nm with 511 nm) improved pigment scores, and skin samples showed fewer vessels after treatment. It was a small study without a comparison group, and melasma tends to return after any procedure.
For rosacea, systematic reviews support vascular lasers and light for persistent redness and visible vessels, with most of the evidence for pulsed dye and KTP lasers and intense pulsed light. Yellow lasers work on the same target and are used for the same purpose, but they have fewer controlled trials. None of these lasers cures rosacea or stops flushing triggers; they reduce the vascular part of the problem.
Pico laser and laser toning have the stronger evidence for pigment, and the clearer warnings: low-fluence toning repeated too often can leave pale, mottled spots, which is why settings and intervals are kept conservative in Asian skin.

What IN Eternity Clinic uses for these concerns
For the concerns yellow laser is used for, the clinic’s options are these:
- Redness and rosacea: the 少女光 675 nm laser (DEKA RedTouch Pro), which acts on collagen and the vascular part of the dermis under contact cooling, alongside medical treatment and trigger control; see rosacea treatment in Singapore.
- Reactive, red-prone skin: the Triple Hydrating LDM facial, a non-thermal ultrasound facial.
- Brown pigment, sun spots and freckles: pico laser on the Fotona StarWalker PQX or DEKA TORO.
- Uneven tone and part of melasma care: laser toning at conservative settings, within a melasma plan.
The choice follows what the skin shows. Many plans combine a redness treatment and a pigment treatment in sequence, because red and brown marks often sit side by side after acne. How pico, Q-switched and toning differ from each other is covered in pico vs Q-switched vs laser toning.
What Dr Sin Yong looks for
- Red or brown. Pressing a glass slide or finger on a mark: redness from vessels blanches, brown pigment does not.
- Pattern of redness. Central flushing, fixed redness, visible vessels or patchy irritation.
- Pigment type. Sun spots, freckles, melasma, Hori’s naevus or post-inflammatory marks, often side by side.
- Skin type and tan. How readily your skin darkens after irritation, which shapes energy and intervals.
- Triggers. Heat, sun, products, hormones and recent treatments.
- What has been tried. Previous lasers, peels and creams, and how the skin reacted.
General clinical observations used at consultation; they describe what is checked, not any individual result.
Downtime and risks: how the three compare in Asian skin
Yellow laser usually leaves redness and mild swelling for hours to a few days; small crusts can form over treated vessels. Because melanin also absorbs yellow light, a tan or darker skin raises the risk of blistering or post-inflammatory darkening.
Pico laser causes redness and, on treated spots, pinpoint darkening or fine crusts that lift within about a week. Post-inflammatory darkening is the main risk in Asian skin and is reduced by strict sun protection.
Laser toning leaves mild redness for hours. The specific risk is over-treatment: too many sessions too close together, or energy pushed too high, can leave pale, mottled spots that are slow to recover.
With all three, Singapore’s sun and heat matter. Daily broad-spectrum sunscreen, avoiding heat exposure for a few days after treatment and pausing irritating skincare reduce the risk of rebound pigment.
When redness or a dark mark is not cosmetic: signs to have checked first
Most facial redness and pigment is benign. A few patterns need a diagnosis before any laser.
- A rash across the cheeks and nose with joint pain, mouth ulcers or fever: this can be lupus and needs blood tests.
- Redness that is hot, painful and spreading, with fever: this can be infection and needs prompt care.
- A new or changing dark spot that is irregular in shape or colour, growing, itching or bleeding: this is examined, and sometimes biopsied, before anything else.
- Eye pain, light sensitivity or blurred vision with facial redness: eye rosacea needs an eye doctor.
- Redness that began after a strong steroid cream: stopping is supervised, because it often flares first.
Where any of these apply, the first step is a diagnosis. A cosmetic plan can follow once that is settled.

How much do redness and pigment lasers cost in Singapore?
Cost depends on the concern and the plan rather than the name of the laser: how many sessions are needed, whether redness and pigment are both treated, the area covered, and the skincare and sun protection that support the result. A single-target plan such as a few sun spots differs from a course for melasma with a redness component. At IN Eternity Clinic, Dr Sin Yong explains the plan and gives a written quote after assessment. The consultation fee is S$120, waived with any medical treatment.
Broadband light is compared with picosecond laser in BBL laser vs pico laser.
Who yellow laser suits, acne and aftercare
Who is yellow laser suitable for?
Yellow laser targets blood vessels and some pigment, so it is used for facial redness, rosacea, broken vessels and some types of melasma. It is used with care in darker skin. IN Eternity does not offer yellow laser, and uses other treatments for redness and pigment after an assessment of the cause.
Can yellow laser treat acne?
Lasers that target blood vessels may reduce redness and inflammation in acne and the red marks it leaves. They do not replace medical acne treatment, which controls oil, bacteria and blocked pores. Red marks after acne often fade with time, sun protection and other treatments.
What should I avoid after a laser for redness or pigment?
Avoid sun exposure and use sunscreen daily, skip saunas, hot yoga, alcohol and very hot showers for a day or two, and keep skincare gentle without retinoids or acids for a few days. Do not pick any flaking. Contact the clinic if you notice blistering or marks that do not fade.
Frequently asked questions about yellow laser
What is yellow laser treatment for?
Yellow laser treatment is used for facial redness, rosacea, post-acne red marks and a general brightening effect. It works on blood vessels and melanin at a shallow depth. It is not the first choice for deep or dense pigment, scars or laxity.
How many sessions of yellow laser to see results?
Yellow laser is usually planned as a course of four to six sessions a few weeks apart, with redness improving gradually across the course. Results vary and are maintained with sun protection and occasional sessions.
Is yellow laser worth it?
A yellow laser (577 nm) targets redness and gives a mild brightening effect with little downtime, so it is worth considering for rosacea-type redness and dull, reactive skin. For brown pigment, picosecond lasers are more direct. IN Eternity Clinic treats redness with long-pulsed 1064 and 755 nm laser in the R2 Glow protocol.
What are the benefits of yellow laser?
Yellow laser (577 to 578 nm) mainly targets small blood vessels, so its benefits are for redness, fine vessels and red acne marks. Redness is treated here with the 675 nm 少女光 laser and medical care, and brown pigment with pico laser or laser toning.
Is yellow laser better than pico laser?
Neither is better in general; they target different things. Yellow laser is absorbed mainly by blood vessels and is used for redness. Pico laser breaks up pigment and is used for brown spots. The concern decides which kind of laser fits.
Can yellow laser treat melasma?
Small studies in Asian patients report improvement in melasma with copper bromide yellow laser, on the rationale that melasma skin has more small vessels. Melasma still needs sun protection and medical skincare, and it tends to return after any procedure.
Which laser helps facial redness?
Vascular lasers such as yellow, pulsed dye and KTP lasers, and the 675 nm laser, act on the vascular part of redness. The cause matters first: rosacea, a damaged barrier, red acne marks and visible vessels each need a different plan.
Is laser toning the same as pico laser?
No. Laser toning passes a low-energy Q-switched 1064 nm laser over the whole face many times across a course. Pico laser uses picosecond pulses, often aimed at specific spots. Both target pigment; toning is gentler per session.
Which laser gives the skin a glow?
It depends on why the skin looks dull. Redness, uneven pigment, rough texture and dehydration each answer to a different treatment. Working out which one dominates comes before choosing a laser.
Can pico laser and a redness laser be combined?
Often, yes, because red and brown marks commonly sit side by side after acne. They are usually sequenced rather than done at full strength on the same day, and the order is set at assessment.
Is there downtime after yellow laser?
Usually redness and mild swelling for hours to a few days, sometimes small crusts over treated vessels. A tan or darker skin raises the risk of darkening, so sun protection in the weeks around treatment matters.
Book an assessment
IN Eternity Clinic, 9 Scotts Road, #12-01 Pacific Plaza, Singapore 228210. By appointment with Medical Director Dr Sin Yong. Monday to Saturday, 11am to 8pm. WhatsApp or call +65 8815 3008. The consultation fee is waived with any medical treatment.
International KOL — CLASSYS · HIRONIC · DEKA · ALMA · FOTONA · LUTRONIC
References
- Anderson RR, Parrish JA. Selective photothermolysis: precise microsurgery by selective absorption of pulsed radiation. Science 1983;220(4596):524-527. doi:10.1126/science.6836297
- Lee HI, Lim YY, Kim BJ, et al. Clinicopathologic efficacy of copper bromide plus/yellow laser (578 nm with 511 nm) for treatment of melasma in Asian patients. Dermatol Surg 2010;36(6):885-893. doi:10.1111/j.1524-4725.2010.01564.x
- Kim EH, Kim YC, Lee ES, Kang HY. The vascular characteristics of melasma. J Dermatol Sci 2007;46(2):111-116. doi:10.1016/j.jdermsci.2007.01.009
- Passeron T, Picardo M. Melasma, a photoaging disorder. Pigment Cell Melanoma Res 2018;31(4):461-465. doi:10.1111/pcmr.12684
- van Zuuren EJ, Fedorowicz Z, Tan J, et al. Interventions for rosacea based on the phenotype approach: an updated systematic review including GRADE assessments. Br J Dermatol 2019;181(1):65-79. doi:10.1111/bjd.17590
- Wu DC, Goldman MP, Wat H, Chan HHL. A systematic review of picosecond laser in dermatology: evidence and recommendations. Lasers Surg Med 2021;53(1):9-49 (online 2020). doi:10.1002/lsm.23244
- Wattanakrai P, Mornchan R, Eimpunth S. Low-fluence Q-switched neodymium-doped yttrium aluminum garnet (1,064 nm) laser for the treatment of facial melasma in Asians. Dermatol Surg 2010;36(1):76-87. doi:10.1111/j.1524-4725.2009.01383.x
- Chan NPY, Ho SGY, Shek SYN, Yeung CK, Chan HH. A case series of facial depigmentation associated with low fluence Q-switched 1,064 nm Nd:YAG laser for skin rejuvenation and melasma. Lasers Surg Med 2010;42(8):712-719. doi:10.1002/lsm.20956
- Davis EC, Callender VD. Postinflammatory hyperpigmentation: a review of the epidemiology, clinical features, and treatment options in skin of color. J Clin Aesthet Dermatol 2010;3(7):20-31. PMID 20725554
- Singapore Medical Council. Guidelines on Aesthetic Practices for Doctors (2016 edition). healthprofessionals.gov.sg/smc
These sources describe mechanisms and general evidence. They are not a promise of any individual result; suitability is decided at an in-person assessment.